by admin | Sep 30, 2022 | Posts
It is necessary to electroclean before plating to remove oils, grease, rouge, passive oxide films, and other surface contaminants left over from manufacturing and polishing. Electrocleaning utilizes a heated alkaline solution, low voltage direct electrical current...
by admin | Nov 30, 2021 | Posts
How often should I change my plating rinse water? You can’t clean something with dirty water, so how do you know when it’s time for a change? If you use an aggressive electrocleaner like Krohn Heavy Duty Electrocleaner or ElectroKing™ you can monitor the pH....
by admin | Dec 7, 2016 | Posts
Have you ever questioned if deionized water can be used in place of the distilled water recommend for use when making a plating bath from a concentrated solution, replacing water evaporated from an existing bath or for use as rinse water? Is there a real difference in...
by admin | Sep 30, 2014 | Posts
Krohn solder paste is a homogeneous blend of micro fine spherical solder powder, flux and binder available in gold, silver, platinum, palladium, copper, and low temperature formulations. The unique properties of paste solder make it perfect for use on, jump rings, in...
